Art Room Safety SWMS

Product Overview

This SWMS covers art room setup, art activities, chemical handling, kiln work, heat tools, clean-up and close-down. It supports planning and managing risks from electrical equipment, chemicals, dust, sharp tools, heat, flames, fumes and room access.

Activities & Specific Tasks Covered

This document includes task-specific risk controls for:

• Plan activities and brief room users
• Set up the room, access and ventilation arrangements
• Inspect electrical equipment and leads
• Store chemicals and fuels appropriately
• Prepare clay and dry media
• Mix paints and glazes
• Conduct general art activities
• Load, operate and unload the pottery kiln
• Use heat guns and blow torches
• Clean spills, waste and work surfaces
• Close down the room and review residual hazards

Who is this for?

Suitable for contractors, workers, supervisors and businesses carrying out art room activities.

Specific Job Steps & Hazards Covered

Legislation & References

The template includes references relevant to the documented work, including:

• Applicable Commonwealth, state or territory WHS/OHS legislation and regulations, including duties to manage risks, provide safe plant, safe systems of work, information, training, supervision, workplace facilities and hazardous-chemical controls.
• Safe Work Australia model Code of Practice: How to Manage Work Health and Safety Risks (guidance; legal status depends on adoption in the relevant jurisdiction).
• Safe Work Australia model Code of Practice: Managing Risks of Hazardous Chemicals in the Workplace (guidance; legal status depends on adoption in the relevant jurisdiction).
• Safe Work Australia model Code of Practice: Managing the Work Environment and Facilities (guidance; legal status depends on adoption in the relevant jurisdiction). The code identifies the need to manage heat exposure and train workers to recognise and report heat illness symptoms.
• Safe Work Australia model Code of Practice: Managing Electrical Risks in the Workplace (guidance; legal status depends on adoption in the relevant jurisdiction). It supports competent use of electrical equipment, isolation and safe access controls.
• Safe Work Australia model Code of Practice: Managing Risks of Plant in the Workplace (guidance; legal status depends on adoption in the relevant jurisdiction). It describes lock-out, tagging and testing isolation arrangements.
• Safe Work Australia model Code of Practice: Hazardous Manual Tasks (guidance; legal status depends on adoption in the relevant jurisdiction).
• AS/NZS 3000 Electrical installations (Wiring Rules); AS/NZS 3760 In-service safety inspection and testing of electrical equipment; AS/NZS 1715 and AS/NZS 1716 respiratory protective equipment; AS/NZS 1337.1 eye and face protection; AS/NZS 2161 protective gloves; AS/NZS 2210.3 safety footwear; AS/NZS 1270 hearing protectors; AS 1940 storage and handling of flammable and combustible liquids.
• The model spray-painting guidance supports minimising flammable quantities, excluding ignition sources, ventilating work areas, promptly removing waste and providing suitable fire extinguishers.

---

Standard SWMS Features (Click to Expand)

• Task-specific job steps, hazards and control measures
• Initial and residual risk ratings
• Assigned responsible persons for each job step
• Plant, equipment and PPE requirements where applicable
• Permits, qualifications and high-risk construction work details where applicable
• Worker consultation, sign-off and review sections